What are the characteristics and advantages of LED street lights? LED lights have been recognized by many people, more and more products in the market, the multi-faceted use of LED, whether it is a lamp or a screen are involved in LED, and now the country is also promoting energy saving, then come to see the LED street lights of Liyang?

What are the characteristics of LED street lights?

(1) Energy-saving lamps need to have the characteristics of low current and high brightness, which is exactly the case for LED lamps as street lamps, which can ensure that the device can be used normally and save energy.

(2) New green environmental protection light source, cold light source used by LED, small glare, no radiation, and no harmful substances will be emitted during use. LED environmental benefits are better, there is no ultraviolet and infrared in the spectrum, and the waste can be recycled, does not contain mercury, no pollution, and can be safely touched, attributed to a typical green lighting source.

(3) Long life. LED street lights because to continue to use, replacement, especially batch replacement will consume a lot of manpower and material resources, so the choice of long life LED street lights can avoid unnecessary losses.

(4) The lamp structure is reasonable. LED street lights will completely change the structure of the lamp, the structure of LED street lights in the initial brightness conditions, through rare earth again to improve the brightness, due to the progress of optical lenses, its luminous brightness has been further improved. LED is a solid state light source packaged with epoxy resin, its structure does not have a glass bubble filament and other easily damaged parts, is an all-solid structure, so it can taste the shock, without being damaged.

(5) Light color simple, light color. As the use of street lights, LED street lights require simple light color, can not appear too much noise, and it is obviously more important to ensure the brightness of lighting while ensuring road safety.

(6) High security. LED light source uses low voltage drive, luminous stability, no pollution, no stroboscope phenomenon when 50Hz AC power supply is selected, no ultraviolet B band, color rendering index Ra level is close to 100, color temperature 5000K, is close to the sun color temperature. And the cold light source with low heat and no thermal radiation can accurately control the light type and luminous viewpoint, the light color is soft, no glare, and does not contain mercury sodium and other substances that damage LED street lights.

What are the advantages of LED street lights?

The well-designed LED street lights emit clear, controllable and beautiful light. The optics designed in LED fixtures ensure that the light hits where it belongs, which means less light is wasted.

Second, LED lamps have lower maintenance costs and lower energy consumption. Since most street lights are owned and operated by utility companies, using leds can reduce energy consumption by about 40%. At the same time, the more important savings are in maintenance. Because the lumen output of the high-pressure sodium lamp will be reduced, the high-pressure sodium lamp must be replaced at least every five years. Materials and labor for a single bulb replacement can cost $80 to $200. Since the life of LED lamps is three to four times longer than HID, the cost savings of individual maintenance can be very large.

Third, decorative LED street lighting is on the rise. With the improvement of technology and the reduction of manufacturing costs, lighting manufacturers are able to provide a wider range of decorative lighting options that can mimic the lighting design of old-fashioned gas lamps, etc., which is very aesthetically advantageous.

What are the characteristics and advantages of LED street lights? The above Xiaobian summarizes the characteristics and advantages of LED street lamp products of Liyang customers. Please contact the official website for business cooperation and customize the corresponding products for you!